Report date: Mar 26, 2024 Conflict count: 356923 Publisher: Informa UK (Taylor & Francis) Title count: 335 Conflict count: 7716 ========================================================== Created: 2014-09-25 17:12:59.0 ConfID: 4512211 CauseID: 1372271965 OtherID: 110073336 JT: International Journal of Rotating Machinery MD: Bachschmid, 9 ,2,97,2003,Identification of Rub and Unbalance in 320 MW Turbogenerators DOI: 10.1080/10236210309497(Journal) (4512211-N ) DOI: 10.1155/S1023621X03000095(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4513975 CauseID: 1362563596 OtherID: 94904752, 1362658485 JT: International Journal of Rotating Machinery MD: Miyauchi, 10 ,2,115,2004,Optimization of Meridional Flow Channel Design of Pump Impeller DOI: 10.1080/10236210490276863(Journal) (4513975-N ) DOI: 10.1155/S1023621X04000120(Journal) ========================================================== Created: 2013-11-15 19:22:17.0 ConfID: 4514110 CauseID: 1362658496 OtherID: 110081825, 1372271939 JT: International Journal of Rotating Machinery MD: Perot, 9 ,5,375,2003,Application of the Turbulent Potential Model to Unsteady Flows and Three-Dimensional Boundary Layers DOI: 10.1080/10236210309504(Journal) (4514110-N ) DOI: 10.1155/S1023621X03000356(Journal) ========================================================== Created: 2013-11-10 11:31:44.0 ConfID: 4514111 CauseID: 1362563584 OtherID: 110076146, 1362658496 JT: International Journal of Rotating Machinery MD: Braun, 9 ,3,171,2003,Two- and Three-Dimensional Numerical Experiments Representing Two Limiting Cases of an In-Line Pair of Finger Seal Components DOI: 10.1080/10236210309524(Journal) (4514111-N ) DOI: 10.1155/S1023621X03000162(Journal) ========================================================== Created: 2013-11-15 19:22:02.0 ConfID: 4514248 CauseID: 1362658485 OtherID: 138794884, 1372255403 JT: International Journal of Rotating Machinery MD: Bachschmid, 10 ,4,283,2004,Deflections and Strains in Cracked Shafts due to Rotating Loads: A Numerical and Experimental Analysis DOI: 10.1080/10236210490447728(Journal) (4514248-N ) DOI: 10.1155/S1023621X04000296(Journal) ========================================================== Created: 2013-11-15 19:22:12.0 ConfID: 4514249 CauseID: 1362658489 OtherID: 110051274 JT: International Journal of Rotating Machinery MD: Lattime, 8 ,2,153,2002,Rotating Brush Seal DOI: 10.1080/10236210211858(Journal) (4514249-N ) DOI: 10.1155/S1023621X02000143(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4514250 CauseID: 1362563596 OtherID: 110097220, 1372255711 JT: International Journal of Rotating Machinery MD: Demailly, 10 ,3,155,2004,Unbalance Responses of Rotor/Stator Systems with Nonlinear Bearings by the Time Finite Element Method DOI: 10.1080/10236210490426226(Journal) (4514250-N ) DOI: 10.1155/S1023621X04000168(Journal) ========================================================== Created: 2013-11-15 19:22:17.0 ConfID: 4514443 CauseID: 1362658496 OtherID: 110080135, 1372271742 JT: International Journal of Rotating Machinery MD: Kinnas, 9 ,4,263,2003,Modeling of Unsteady Sheet Cavitation on Marine Propeller Blades DOI: 10.1080/10236210309511(Journal) (4514443-N ) DOI: 10.1155/S1023621X03000241(Journal) ========================================================== Created: 2013-11-10 11:31:29.0 ConfID: 4514837 CauseID: 1362563579 OtherID: 110092130, 1362658485 JT: International Journal of Rotating Machinery MD: Blekhman, 10 ,1,45,2004,Multi-Control-Volume Analysis of the Compression Process in a High-Temperature Root''s Type Compressor DOI: 10.1080/10236210490258061(Journal) (4514837-N ) DOI: 10.1155/S1023621X04000053(Journal) ========================================================== Created: 2013-11-10 11:32:25.0 ConfID: 4515531 CauseID: 1362563593 OtherID: 110073336, 1372271461 JT: International Journal of Rotating Machinery MD: Jin, 9 ,2,81,2003,Local Mass and Heat Transfer on a Turbine Blade Tip DOI: 10.1080/10236210309495(Journal) (4515531-N ) DOI: 10.1155/S1023621X03000083(Journal) ========================================================== Created: 2014-02-12 16:01:29.0 ConfID: 4515950 CauseID: 1364132869 OtherID: 110097220 JT: International Journal of Rotating Machinery MD: Ryzhik, 10 ,3,193,2004,Partial Compensation of Unbalance by Oneand Two-Plane Automatic Balancing Devices DOI: 10.1080/10236210490426271(Journal) (4515950-N ) DOI: 10.1155/S1023621X0400020X(Journal) ========================================================== Created: 2014-12-30 16:05:13.0 ConfID: 4524099 CauseID: 1375069477 OtherID: 110081825, 1375331957 JT: International Journal of Rotating Machinery MD: Lee, 9 ,5,353,2003,Rotor Cascade Shape Optimization with Unsteady Passing Wakes Using Implicit Dual-Time Stepping and a Genetic Algorithm DOI: 10.1080/10236210309501(Journal) (4524099-N ) DOI: 10.1155/S1023621X03000332(Journal) ========================================================== Created: 2013-11-10 11:31:24.0 ConfID: 4534759 CauseID: 1362563578 OtherID: 110051274, 1362658489 JT: International Journal of Rotating Machinery MD: Nelson, 8 ,6,431,2002,Steady Synchronous Response and Balancing of Rotor Systems with Residual Shaft Bow DOI: 10.1080/10236210214325(Journal) (4534759-N ) DOI: 10.1155/S1023621X02000416(Journal) ========================================================== Created: 2013-11-15 19:22:02.0 ConfID: 4534799 CauseID: 1362658485 OtherID: 138794884, 1372255396 JT: International Journal of Rotating Machinery MD: Saruhan, 10 ,4,301,2004,Design Optimization of Tilting-Pad Journal Bearing Using a Genetic Algorithm DOI: 10.1080/10236210490447746(Journal) (4534799-N ) DOI: 10.1155/S1023621X04000314(Journal) ========================================================== Created: 2013-11-15 19:22:17.0 ConfID: 4534893 CauseID: 1362658496 OtherID: 110080135, 1372271767 JT: International Journal of Rotating Machinery MD: Sadamoto, 9 ,4,239,2003,Reduction of Discrete-Frequency Fan Noise Using Slitlike Expansion Chambers DOI: 10.1080/10236210309513(Journal) (4534893-N ) DOI: 10.1155/S1023621X03000216(Journal) ========================================================== Created: 2013-11-15 19:22:02.0 ConfID: 4534894 CauseID: 1362658485 OtherID: 110092130 JT: International Journal of Rotating Machinery MD: Sweger, 10 ,1,55,2004,Measurements of Strain on 310 mm Torque Converter Turbine Blades DOI: 10.1080/10236210490258070(Journal) (4534894-N ) DOI: 10.1155/S1023621X04000065(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4535017 CauseID: 1362563596 OtherID: 112522586, 1362658485 JT: International Journal of Rotating Machinery MD: Ferrara, 10 ,6,433,2004,Rotating Stall in Centrifugal Compressor Vaneless Diffuser: Experimental Analysis of Geometrical Parameters Influence on Phenomenon Evolution DOI: 10.1080/10236210490503950(Journal) (4535017-N ) DOI: 10.1155/S1023621X04000430(Journal) ========================================================== Created: 2013-11-10 11:31:29.0 ConfID: 4535018 CauseID: 1362563579 OtherID: 110097220, 1362658485 JT: International Journal of Rotating Machinery MD: Sawicki, 10 ,3,227,2004,Cavitation Effects on the Stability of a Submerged Journal Bearing DOI: 10.1080/10236210490426370(Journal) (4535018-N ) DOI: 10.1155/S1023621X04000247(Journal) ========================================================== Created: 2013-11-15 19:22:12.0 ConfID: 4535033 CauseID: 1362658489 OtherID: 267303640 JT: International Journal of Rotating Machinery MD: BIBA, 8 ,5,309,2002,Performance Evaluation and Fluid Flow Analysis in Low Flow Stages of Industrial Centrifugal Compressor DOI: 10.1080/1023-620291910734(Journal) (4535033-N ) DOI: 10.1155/S1023621X02000295(Journal) ========================================================== Created: 2013-11-10 11:31:44.0 ConfID: 4535159 CauseID: 1362563584 OtherID: 110069946, 1362658496 JT: International Journal of Rotating Machinery MD: Zhou, 9 ,1,49,2003,Investigation of Flow Through Centrifugal Pump Impellers Using Computational Fluid Dynamics DOI: 10.1080/10236210309509(Journal) (4535159-N ) DOI: 10.1155/S1023621X0300006X(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4535414 CauseID: 1362563597 OtherID: 110051274, 1362658489 JT: International Journal of Rotating Machinery MD: Delgado, 8 ,2,99,2002,Balancing of an Experimental Rotor without Trial Runs DOI: 10.1080/10236210211861(Journal) (4535414-N ) DOI: 10.1155/S1023621X02000106(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4535455 CauseID: 1362563597 OtherID: 267303640, 1362658489 JT: International Journal of Rotating Machinery MD: UCHIYAMA, 8 ,4,295,2002,Numerical Prediction of Bubbly Flow Around an Oscillating Hydrofoil by Incompressible Two-Fluid Model DOI: 10.1080/1023-620291910914(Journal) (4535455-N ) DOI: 10.1155/S1023621X02000271(Journal) ========================================================== Created: 2013-11-15 19:22:02.0 ConfID: 4551093 CauseID: 1362658485 OtherID: 112522586 JT: International Journal of Rotating Machinery MD: Davis, 10 ,6,495,2004,Unsteady Interaction Between a Transonic Turbine Stage and Downstream Components DOI: 10.1080/10236210490506425(Journal) (4551093-N ) DOI: 10.1155/S1023621X04000491(Journal) ========================================================== Created: 2013-11-15 19:22:12.0 ConfID: 4551094 CauseID: 1362658489 OtherID: 110051274 JT: International Journal of Rotating Machinery MD: Najjar, 8 ,6,397,2002,Effect of Prewhirl on the Performance of Centrifugal Compressors DOI: 10.1080/10236210214326(Journal) (4551094-N ) DOI: 10.1155/S1023621X02000374(Journal) ========================================================== Created: 2013-11-15 19:22:12.0 ConfID: 4551095 CauseID: 1362658489 OtherID: 267303640 JT: International Journal of Rotating Machinery MD: ADACHI, 8 ,3,193,2002,Study on the Fluctuating Flow in an Axial Flow Fan (Effects of Operational Conditions and Rotational Speeds) DOI: 10.1080/1023-620291910824(Journal) (4551095-N ) DOI: 10.1155/S1023621X02000180(Journal) ========================================================== Created: 2013-11-10 11:31:29.0 ConfID: 4551307 CauseID: 1362563579 OtherID: 94904752, 1362658485 JT: International Journal of Rotating Machinery MD: Yu, 10 ,2,85,2004,General Influence Coefficient Algorithm in Balancing of Rotating Machinery DOI: 10.1080/10236210490276674(Journal) (4551307-N ) DOI: 10.1155/S1023621X04000090(Journal) ========================================================== Created: 2013-11-10 11:31:44.0 ConfID: 4551308 CauseID: 1362563584 OtherID: 110069946, 1372271546 JT: International Journal of Rotating Machinery MD: Richardson, 9 ,1,35,2003,Erosion Testing of Coatings for V-22 Aircraft Applications DOI: 10.1080/10236210309507(Journal) (4551308-N ) DOI: 10.1155/S1023621X03000046(Journal) ========================================================== Created: 2013-11-15 19:22:17.0 ConfID: 4551309 CauseID: 1362658496 OtherID: 110080135 JT: International Journal of Rotating Machinery MD: Kalkat, 9 ,4,255,2003,Rotor Dynamics Analysis of Rotating Machine Systems Using Artificial Neural Networks DOI: 10.1080/10236210309517(Journal) (4551309-N ) DOI: 10.1155/S1023621X0300023X(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4551310 CauseID: 1362563596 OtherID: 85629951, 1362658485 JT: International Journal of Rotating Machinery MD: Methling, 10 ,5,387,2004,The Pre-Stall Behavior of a 4-Stage Transonic Compressor and Stall Monitoring Based on Artificial Neural Networks DOI: 10.1080/10236210490474548(Journal) (4551310-N ) DOI: 10.1155/S1023621X04000399(Journal) ========================================================== Created: 2013-11-10 11:31:29.0 ConfID: 4551311 CauseID: 1362563579 OtherID: 110097220, 1372255568 JT: International Journal of Rotating Machinery MD: Nordmann, 10 ,3,183,2004,Fault Diagnosis in a Centrifugal Pump Using Active Magnetic Bearings DOI: 10.1080/10236210490426262(Journal) (4551311-N ) DOI: 10.1155/S1023621X04000193(Journal) ========================================================== Created: 2013-11-10 11:31:24.0 ConfID: 4551324 CauseID: 1362563578 OtherID: 267303640, 1362658489 JT: International Journal of Rotating Machinery MD: WANG, 8 ,3,201,2002,Thermomechanical Analysis of Four-lobe Rotors in a Roots-type Multi-Recompression Heater DOI: 10.1080/1023-620291910833(Journal) (4551324-N ) DOI: 10.1155/S1023621X02000192(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4551734 CauseID: 1362563596 OtherID: 85629951, 1362658485 JT: International Journal of Rotating Machinery MD: Wang, 10 ,5,355,2004,An Experimental Investigation on Transpiration Cooling Part II: Comparison of Cooling Methods and Media DOI: 10.1080/10236210490474476(Journal) (4551734-N ) DOI: 10.1155/S1023621X04000363(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4551735 CauseID: 1362563596 OtherID: 94904752, 1362658485 JT: International Journal of Rotating Machinery MD: Rao.D, 10 ,2,99,2004,Pressure Drop Distribution in Smooth and Rib Roughened Square Channel with Sharp 180° Bend in the Presence of Guide Vanes DOI: 10.1080/10236210490276692(Journal) (4551735-N ) DOI: 10.1155/S1023621X04000119(Journal) ========================================================== Created: 2013-11-10 11:31:44.0 ConfID: 4551736 CauseID: 1362563584 OtherID: 110080135, 1377055368 JT: International Journal of Rotating Machinery MD: Wu, 9 ,4,293,2003,Phase-Averaged Method Applied to Periodic Flow Between Shrouded Corotating Disks DOI: 10.1080/10236210309519(Journal) (4551736-N ) DOI: 10.1155/S1023621X03000277(Journal) ========================================================== Created: 2013-11-10 11:31:29.0 ConfID: 4551789 CauseID: 1362563579 OtherID: 110092130, 1362658485 JT: International Journal of Rotating Machinery MD: Biba, 10 ,1,75,2004,Inverse Design of Centrifugal Compressor Stages Using a Meanline Approach DOI: 10.1080/10236210490258106(Journal) (4551789-N ) DOI: 10.1155/S1023621X04000089(Journal) ========================================================== Created: 2014-09-24 17:02:32.0 ConfID: 4552766 CauseID: 1372255699 OtherID: 138794884 JT: International Journal of Rotating Machinery MD: Fujii, 10 ,4,241,2004,Higher Order Rotating Cavitation in an Inducer DOI: 10.1080/10236210490447502(Journal) (4552766-N ) DOI: 10.1155/S1023621X04000260(Journal) ========================================================== Created: 2014-11-10 16:02:06.0 ConfID: 4556107 CauseID: 1373208470 OtherID: 267303640 JT: International Journal of Rotating Machinery MD: MANNA, 8 ,5,353,2002,Effects of the Transverse Curvature on the Statistics of Fully Developed Turbulent Flow in an Annular Pipe DOI: 10.1080/1023-620291910770(Journal) (4556107-N ) DOI: 10.1155/S1023621X02000337(Journal) ========================================================== Created: 2013-11-15 19:22:02.0 ConfID: 4566040 CauseID: 1362658485 OtherID: 110097220 JT: International Journal of Rotating Machinery MD: Lornage, 10 ,3,213,2004,Global Dynamics of Shaft Lines Rotating in Surrounding Fluids Application to Thin Fluid Films DOI: 10.1080/10236210490426352(Journal) (4566040-N ) DOI: 10.1155/S1023621X04000223(Journal) ========================================================== Created: 2013-11-10 11:32:25.0 ConfID: 4566162 CauseID: 1362563593 OtherID: 110073336, 1372271575 JT: International Journal of Rotating Machinery MD: Bachschmid, 9 ,2,113,2003,Transverse Crack Modeling and Validation in Rotor Systems, Including Thermal Effects DOI: 10.1080/10236210309491(Journal) (4566162-N ) DOI: 10.1155/S1023621X03000101(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4580257 CauseID: 1362563596 OtherID: 110097220, 1362658485 JT: International Journal of Rotating Machinery MD: Olsson, 10 ,3,221,2004,Limits for the Use of Auto-Balancing DOI: 10.1080/10236210490426361(Journal) (4580257-N ) DOI: 10.1155/S1023621X04000235(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4580261 CauseID: 1362563596 OtherID: 94904752, 1372255455 JT: International Journal of Rotating Machinery MD: Bachschmid, 10 ,2,121,2004,Crack Detectability in Vertical Axis Cooling Pumps During Operation DOI: 10.1080/10236210490276926(Journal) (4580261-N ) DOI: 10.1155/S1023621X04000132(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4580263 CauseID: 1362563596 OtherID: 110092130, 1372923735 JT: International Journal of Rotating Machinery MD: Jou, 10 ,1,1,2004,Pumping Speed Measurement and Analysis for the Turbo Booster Pump DOI: 10.1080/10236210490258016(Journal) (4580263-N ) DOI: 10.1155/S1023621X04000016(Journal) ========================================================== Created: 2013-11-10 11:31:29.0 ConfID: 4580904 CauseID: 1362563579 OtherID: 112522586, 1362658485 JT: International Journal of Rotating Machinery MD: Fleming, 10 ,6,489,2004,Transient Vibration Prediction for Rotors on Ball Bearings Using Load-Dependent Nonlinear Bearing Stiffness DOI: 10.1080/10236210490504102(Journal) (4580904-N ) DOI: 10.1155/S1023621X0400048X(Journal) ========================================================== Created: 2013-11-15 19:22:12.0 ConfID: 4580961 CauseID: 1362658489 OtherID: 110051274 JT: International Journal of Rotating Machinery MD: Aydin, 8 ,2,81,2002,Theoretical Analysis of Heat Transfer Through an Idealized Gas Turbine Blade Model with Thermal Barrier Coating DOI: 10.1080/10236210211863(Journal) (4580961-N ) DOI: 10.1155/S1023621X02000088(Journal) ========================================================== Created: 2013-11-10 11:31:44.0 ConfID: 4581517 CauseID: 1362563584 OtherID: 110073336, 1372271617 JT: International Journal of Rotating Machinery MD: Baun, 9 ,2,145,2003,Effects of Volute Design and Number of Impeller Blades on Lateral Impeller Forces and Hydraulic Performance DOI: 10.1080/10236210309493(Journal) (4581517-N ) DOI: 10.1155/S1023621X03000137(Journal) ========================================================== Created: 2013-11-10 11:32:25.0 ConfID: 4582052 CauseID: 1362563593 OtherID: 110081825, 1372271473 JT: International Journal of Rotating Machinery MD: Isvoranu, 9 ,5,363,2003,Numerical Simulation of Combustion and Rotor-Stator Interaction in a Turbine Combustor DOI: 10.1080/10236210309498(Journal) (4582052-N ) DOI: 10.1155/S1023621X03000344(Journal) ========================================================== Created: 2013-11-15 19:22:12.0 ConfID: 4593902 CauseID: 1362658489 OtherID: 110051274 JT: International Journal of Rotating Machinery MD: Song, 8 ,1,13,2002,Dynamic Behavior of Elastically Tailored Rotating Blades Modeled as Pretwisted Thin-Walled Beams and Incorporating Adaptive Capabilities DOI: 10.1080/10236210211850(Journal) (4593902-N ) DOI: 10.1155/S1023621X02000027(Journal) ========================================================== Created: 2013-11-10 11:31:29.0 ConfID: 4594022 CauseID: 1362563579 OtherID: 94904752, 1372255515 JT: International Journal of Rotating Machinery MD: Lepicovsky, 10 ,2,135,2004,Intermittent Flow Regimes in a Transonic Fan Airfoil Cascade DOI: 10.1080/10236210490277114(Journal) (4594022-N ) DOI: 10.1155/S1023621X04000144(Journal) ========================================================== Created: 2013-11-10 11:31:24.0 ConfID: 4594105 CauseID: 1362563578 OtherID: 267303640, 1362658489 JT: International Journal of Rotating Machinery MD: BENTLY, 8 ,5,329,2002,Full Annular Rub in Mechanical Seals, Part II: Analytical Study DOI: 10.1080/1023-620291910752(Journal) (4594105-N ) DOI: 10.1155/S1023621X02000313(Journal) ========================================================== Created: 2013-11-15 19:22:17.0 ConfID: 4594120 CauseID: 1362658496 OtherID: 110080135 JT: International Journal of Rotating Machinery MD: Nursen, 9 ,4,247,2003,Numerical Calculation of the Three-Dimensional Swirling Flow Inside the Centrifugal Pump Volutes DOI: 10.1080/10236210309515(Journal) (4594120-N ) DOI: 10.1155/S1023621X03000228(Journal) ========================================================== Created: 2013-11-10 11:31:29.0 ConfID: 4595866 CauseID: 1362563579 OtherID: 138794884, 1372255505 JT: International Journal of Rotating Machinery MD: Kanemoto, 10 ,4,233,2004,Proposition of Unique Pumping System with Counter-Rotating Mechanism DOI: 10.1080/10236210490447494(Journal) (4595866-N ) DOI: 10.1155/S1023621X04000259(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4595906 CauseID: 1362563596 OtherID: 138794884, 1372255577 JT: International Journal of Rotating Machinery MD: Bachschmid, 10 ,4,265,2004,Identification of Rub and Unbalance in 320-MW Turbogenerators DOI: 10.1080/10236210490447719(Journal) (4595906-N ) DOI: 10.1155/S1023621X04000284(Journal) ========================================================== Created: 2013-11-15 19:22:12.0 ConfID: 4606902 CauseID: 1362658489 OtherID: 110051274 JT: International Journal of Rotating Machinery MD: Yu, 8 ,1,71,2002,Comparison of Mobility Method and Mass Conservation Method in a Study of Dynamically Loaded Journal Bearings DOI: 10.1080/10236210211856(Journal) (4606902-N ) DOI: 10.1155/S1023621X02000076(Journal) ========================================================== Created: 2013-11-10 11:31:44.0 ConfID: 4606925 CauseID: 1362563584 OtherID: 110080135, 1362658496 JT: International Journal of Rotating Machinery MD: Nakagawa, 9 ,4,279,2003,Comparison of Two Diffusers in a Transonic Centrifugal Compressor DOI: 10.1080/10236210309514(Journal) (4606925-N ) DOI: 10.1155/S1023621X03000253(Journal) ========================================================== Created: 2013-11-15 19:22:17.0 ConfID: 4606926 CauseID: 1362658496 OtherID: 110076146 JT: International Journal of Rotating Machinery MD: Dupont, 9 ,3,163,2003,Cavitating Flow Calculations in Industry DOI: 10.1080/10236210309523(Journal) (4606926-N ) DOI: 10.1155/S1023621X03000150(Journal) ========================================================== Created: 2014-10-09 17:02:00.0 ConfID: 4606993 CauseID: 1372680110 OtherID: 267303640 JT: International Journal of Rotating Machinery MD: GUBRAN, 8 ,4,285,2002,Composite Shaft Optimization Using Simulated Annealing, Part II: Strength and Stresses DOI: 10.1080/1023-620291910905(Journal) (4606993-N ) DOI: 10.1155/S1023621X0200026X(Journal) ========================================================== Created: 2013-11-15 19:22:17.0 ConfID: 4608243 CauseID: 1362658496 OtherID: 109931915, 1372946319 JT: International Journal of Rotating Machinery MD: Jia, 9 ,6,437,2003,The Dynamic Modeling of Multiple Pairs of Spur Gears in Mesh, Including Friction and Geometrical Errors DOI: 10.1080/10236210390241592(Journal) (4608243-N ) DOI: 10.1155/S1023621X03000423(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4619491 CauseID: 1362563597 OtherID: 267303640, 1362658489 JT: International Journal of Rotating Machinery MD: BOLPAIRE, 8 ,3,215,2002,Experimental Study of the Flow in the Suction Pipe of A Centrifugal Impeller: Steady Conditions Compared with Fast Start-Up DOI: 10.1080/1023-620291910842(Journal) (4619491-N ) DOI: 10.1155/S1023621X02000209(Journal) ========================================================== Created: 2013-11-15 19:22:12.0 ConfID: 4619492 CauseID: 1362658489 OtherID: 267303640 JT: International Journal of Rotating Machinery MD: BENTLY, 8 ,5,319,2002,Full Annular Rub in Mechanical Seals, Part I: Experimental Results DOI: 10.1080/1023-620291910743(Journal) (4619492-N ) DOI: 10.1155/S1023621X02000301(Journal) ========================================================== Created: 2013-11-10 11:31:29.0 ConfID: 4620034 CauseID: 1362563579 OtherID: 110092130, 1362658485 JT: International Journal of Rotating Machinery MD: Mazur, 10 ,1,65,2004,Improvement of the Turbine Main Stop Valves with Flow Simulation in Erosion by Solid Particle Impact CFD DOI: 10.1080/10236210490258089(Journal) (4620034-N ) DOI: 10.1155/S1023621X04000077(Journal) ========================================================== Created: 2014-09-24 17:02:27.0 ConfID: 4620035 CauseID: 1372255674 OtherID: 138794884 JT: International Journal of Rotating Machinery MD: Bachschmid, 10 ,4,253,2004,Transverse Crack Modeling and Validation in Rotor Systems Including Thermal Effects DOI: 10.1080/10236210490447511(Journal) (4620035-N ) DOI: 10.1155/S1023621X04000272(Journal) ========================================================== Created: 2013-11-10 11:32:25.0 ConfID: 4631630 CauseID: 1362563593 OtherID: 110081825, 1362658496 JT: International Journal of Rotating Machinery MD: Shiomi, 9 ,5,337,2003,Internal Flow of a High Specific-Speed Diagonal-Flow Fan (Rotor Outlet Flow Fields with Rotating Stall) DOI: 10.1080/10236210309499(Journal) (4631630-N ) DOI: 10.1155/S1023621X03000319(Journal) ========================================================== Created: 2013-11-15 19:22:02.0 ConfID: 4631631 CauseID: 1362658485 OtherID: 112522586 JT: International Journal of Rotating Machinery MD: Sawicki, 10 ,6,507,2004,A Nonlinear Model for Prediction of Dynamic Coefficients in a Hydrodynamic Journal Bearing DOI: 10.1080/10236210490883111(Journal) (4631631-N ) DOI: 10.1155/S1023621X04000508(Journal) ========================================================== Created: 2013-11-15 19:22:17.0 ConfID: 4632141 CauseID: 1362658496 OtherID: 110069946 JT: International Journal of Rotating Machinery MD: Sawicki, 9 ,1,41,2003,Thermomechanical Behavior of Rotor with Rubbing DOI: 10.1080/10236210309506(Journal) (4632141-N ) DOI: 10.1155/S1023621X03000058(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4632143 CauseID: 1362563597 OtherID: 267303640, 1372680026 JT: International Journal of Rotating Machinery MD: TIWARI, 8 ,4,243,2002,Experimental Study of a Rotor Supported by Deep Groove Ball Bearing DOI: 10.1080/1023-620291910879(Journal) (4632143-N ) DOI: 10.1155/S1023621X02000234(Journal) ========================================================== Created: 2013-11-15 19:22:12.0 ConfID: 4632144 CauseID: 1362658489 OtherID: 110051274 JT: International Journal of Rotating Machinery MD: Flack, 8 ,1,27,2002,Experimental and Predicted Rigid Rotor Stability Threshold of Axial Groove and Three-Lobe Bearings DOI: 10.1080/10236210211853(Journal) (4632144-N ) DOI: 10.1155/S1023621X02000039(Journal) ========================================================== Created: 2014-11-12 16:01:58.0 ConfID: 4635366 CauseID: 1373286669 OtherID: 267303640, 1373306306 JT: International Journal of Rotating Machinery MD: MAGAGNATO, 8 ,3,175,2002,A New Adaptive Turbulence Model for Unsteady Flow Fields in Rotating Machinery DOI: 10.1080/1023-620291910806(Journal) (4635366-N ) DOI: 10.1155/S1023621X02000167(Journal) ========================================================== Created: 2013-11-15 19:22:02.0 ConfID: 4643606 CauseID: 1362658485 OtherID: 110092130 JT: International Journal of Rotating Machinery MD: Vlcek, 10 ,1,27,2004,Predictive Failure of Cylindrical Coatings Using Weibull Analysis DOI: 10.1080/10236210490258043(Journal) (4643606-N ) DOI: 10.1155/S1023621X0400003X(Journal) ========================================================== Created: 2013-11-10 11:31:29.0 ConfID: 4643607 CauseID: 1362563579 OtherID: 110092130, 1362658485 JT: International Journal of Rotating Machinery MD: Bakir, 10 ,1,15,2004,Numerical and Experimental Investigations of the Cavitating Behavior of an Inducer DOI: 10.1080/10236210490258034(Journal) (4643607-N ) DOI: 10.1155/S1023621X04000028(Journal) ========================================================== Created: 2013-11-10 11:31:29.0 ConfID: 4643765 CauseID: 1362563579 OtherID: 85629951, 1362658485 JT: International Journal of Rotating Machinery MD: Kämmerer, 10 ,5,373,2004,Development of a Three-Dimensional Geometry Optimization Method for Turbomachinery Applications DOI: 10.1080/10236210490474502(Journal) (4643765-N ) DOI: 10.1155/S1023621X04000387(Journal) ========================================================== Created: 2013-11-10 11:31:29.0 ConfID: 4643767 CauseID: 1362563579 OtherID: 85629951, 1362658485 JT: International Journal of Rotating Machinery MD: Adachi, 10 ,5,415,2004,Study on the Performance of a Sirocco Fan (Flow Around the Runner Blade) DOI: 10.1080/10236210490474629(Journal) (4643767-N ) DOI: 10.1155/S1023621X04000417(Journal) ========================================================== Created: 2013-11-15 19:22:12.0 ConfID: 4655021 CauseID: 1362658489 OtherID: 110051274, 1372271601 JT: International Journal of Rotating Machinery MD: Jen, 8 ,1,1,2002,Fully Developed Laminar Fluid Flow in a Rotating Isothermal Isosceles Triangular Channel DOI: 10.1080/10236210211855(Journal) (4655021-N ) DOI: 10.1155/S1023621X02000015(Journal) ========================================================== Created: 2013-11-15 19:22:02.0 ConfID: 4655184 CauseID: 1362658485 OtherID: 110092130, 1372946430 JT: International Journal of Rotating Machinery MD: Schobeiri, 10 ,1,33,2004,Aerodynamic and Performance Behavior of a Three-Stage High Efficiency Turbine at Design and Off-Design Operating Points DOI: 10.1080/10236210490258052(Journal) (4655184-N ) DOI: 10.1155/S1023621X04000041(Journal) ========================================================== Created: 2013-11-10 11:31:29.0 ConfID: 4655479 CauseID: 1362563579 OtherID: 138794884, 1362658485 JT: International Journal of Rotating Machinery MD: Akhras, 10 ,4,309,2004,The Flow Rate Influence on the Interaction of a Radial Pump Impeller and the Diffuser DOI: 10.1080/10236210490447764(Journal) (4655479-N ) DOI: 10.1155/S1023621X04000326(Journal) ========================================================== Created: 2013-11-15 19:22:02.0 ConfID: 4666310 CauseID: 1362658485 OtherID: 94904752 JT: International Journal of Rotating Machinery MD: Taslim, 10 ,2,145,2004,Discharge Coefficient Measurements for Flow Through Compound-Angle Conical Holes with Cross-Flow DOI: 10.1080/10236210490277132(Journal) (4666310-N ) DOI: 10.1155/S1023621X04000156(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4666374 CauseID: 1362563596 OtherID: 112522586, 1362658485 JT: International Journal of Rotating Machinery MD: Rao, 10 ,6,459,2004,Effect of Turn Region Treatments on the Pressure Loss Distribution in a Smooth Square Channel with Sharp 180° Bend DOI: 10.1080/10236210490503996(Journal) (4666374-N ) DOI: 10.1155/S1023621X04000454(Journal) ========================================================== Created: 2013-11-15 19:22:02.0 ConfID: 4666785 CauseID: 1362658485 OtherID: 85629951 JT: International Journal of Rotating Machinery MD: Uno, 10 ,5,337,2004,Development of the Floating Centrifugal Pump by Use of Non Contact Magnetic Drive and Its Performance DOI: 10.1080/10236210490474421(Journal) (4666785-N ) DOI: 10.1155/S1023621X0400034X(Journal) ========================================================== Created: 2013-11-10 11:31:44.0 ConfID: 4676136 CauseID: 1362563584 OtherID: 110073336, 1362658496 JT: International Journal of Rotating Machinery MD: Guo, 9 ,2,135,2003,An Experimental Study on the Fluid Forces Induced by Rotor-Stator Interaction in a Centrifugal Pump DOI: 10.1080/10236210309492(Journal) (4676136-N ) DOI: 10.1155/S1023621X03000125(Journal) ========================================================== Created: 2013-11-15 19:22:17.0 ConfID: 4677180 CauseID: 1362658496 OtherID: 109931915, 1372271574 JT: International Journal of Rotating Machinery MD: Habsieger, 9 ,6,419,2003,Flow Characteristics at the Pump-Turbine Interface of a Torque Converter at Extreme Speed Ratios DOI: 10.1080/10236210390241628(Journal) (4677180-N ) DOI: 10.1155/S1023621X0300040X(Journal) ========================================================== Created: 2013-11-10 11:32:25.0 ConfID: 4677182 CauseID: 1362563593 OtherID: 110076146, 1362658496 JT: International Journal of Rotating Machinery MD: Panning, 9 ,3,219,2003,Spatial Dynamics of Tuned and Mistuned Bladed Disks with Cylindrical and Wedge-Shaped Friction Dampers DOI: 10.1080/10236210309520(Journal) (4677182-N ) DOI: 10.1155/S1023621X03000198(Journal) ========================================================== Created: 2013-11-15 19:22:02.0 ConfID: 4677240 CauseID: 1362658485 OtherID: 138794884 JT: International Journal of Rotating Machinery MD: Legrand, 10 ,4,319,2004,Nonlinear Normal Modes of a Rotating Shaft Based on the Invariant Manifold Method DOI: 10.1080/10236210490447773(Journal) (4677240-N ) DOI: 10.1155/S1023621X04000338(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4677241 CauseID: 1362563596 OtherID: 85629951, 1362658485 JT: International Journal of Rotating Machinery MD: Lehr, 10 ,5,401,2004,Experimental Investigation of the Periodic Unsteady Transonic Flow Field Around a Compressor Blade by Means of Particle Image Velocimetry (PIV) DOI: 10.1080/10236210490474566(Journal) (4677241-N ) DOI: 10.1155/S1023621X04000405(Journal) ========================================================== Created: 2013-11-15 19:22:02.0 ConfID: 4687959 CauseID: 1362658485 OtherID: 85629951, 1373305960 JT: International Journal of Rotating Machinery MD: Schramm, 10 ,5,365,2004,Shape Optimization of a Labyrinth Seal Applying the Simulated Annealing Method DOI: 10.1080/10236210490474485(Journal) (4687959-N ) DOI: 10.1155/S1023621X04000375(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4688214 CauseID: 1362563596 OtherID: 94904752, 1372255434 JT: International Journal of Rotating Machinery MD: Ng, 10 ,2,91,2004,Parametric Study of Greitzer''s Instability Flow Model Through Compressor System Using the Taguchi Method DOI: 10.1080/10236210490276683(Journal) (4688214-N ) DOI: 10.1155/S1023621X04000107(Journal) ========================================================== Created: 2014-11-12 16:00:32.0 ConfID: 4691237 CauseID: 1373286481 OtherID: 85629951 JT: International Journal of Rotating Machinery MD: Dittmar, 10 ,5,345,2004,Adiabatic Effectiveness and Heat Transfer Coefficient of Shaped Film Cooling Holes on a Scaled Guide Vane Pressure Side Model DOI: 10.1080/10236210490474458(Journal) (4691237-N ) DOI: 10.1155/S1023621X04000351(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4698377 CauseID: 1362563596 OtherID: 112522586, 1372255692 JT: International Journal of Rotating Machinery MD: Liew, 10 ,6,425,2004,On Using the Transfer Matrix Formulation for Transient Analysis of Nonlinear Rotor Bearing Systems DOI: 10.1080/10236210490447755(Journal) (4698377-N ) DOI: 10.1155/S1023621X04000429(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4718074 CauseID: 1362563596 OtherID: 110097220, 1362658485 JT: International Journal of Rotating Machinery MD: Forte, 10 ,3,175,2004,A Magnetorheological Fluid Damper for Rotor Applications DOI: 10.1080/10236210490426253(Journal) (4718074-N ) DOI: 10.1155/S1023621X04000181(Journal) ========================================================== Created: 2013-11-10 11:32:25.0 ConfID: 4736748 CauseID: 1362563593 OtherID: 110080135, 1362658496 JT: International Journal of Rotating Machinery MD: Wegner, 9 ,4,229,2003,Panel Discussion on Inducer Design Criteria DOI: 10.1080/10236210309512(Journal) (4736748-N ) DOI: 10.1155/S1023621X03000204(Journal) ========================================================== Created: 2013-11-15 19:22:02.0 ConfID: 4736852 CauseID: 1362658485 OtherID: 110097220 JT: International Journal of Rotating Machinery MD: Rodrigues, 10 ,3,163,2004,Interaction of Squeeze Film Dampers and Hole Feed Systems and Its Influence on the Dynamics of a Jeffcott Rotor DOI: 10.1080/10236210490426235(Journal) (4736852-N ) DOI: 10.1155/S1023621X0400017X(Journal) ========================================================== Created: 2013-11-10 11:32:25.0 ConfID: 4745806 CauseID: 1362563593 OtherID: 110081825, 1362658496 JT: International Journal of Rotating Machinery MD: Saathoff, 9 ,5,327,2003,Steady and Unsteady Casingwall Flow Phenomena in a Single-Stage Low-Speed Compressor at Part-Load Conditions DOI: 10.1080/10236210309503(Journal) (4745806-N ) DOI: 10.1155/S1023621X03000307(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4745902 CauseID: 1362563597 OtherID: 267303640, 1372680045 JT: International Journal of Rotating Machinery MD: GUBRAN, 8 ,4,275,2002,Composite Shaft Optimization Using Simulated Annealing, Part I: Natural Frequency DOI: 10.1080/1023-620291910897(Journal) (4745902-N ) DOI: 10.1155/S1023621X02000258(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4754709 CauseID: 1362563596 OtherID: 112522586, 1362658485 JT: International Journal of Rotating Machinery MD: Balbahadur, 10 ,6,477,2004,Part II—Case Studies for a Synchronous Thermal Instability Operating in Overhung Rotors DOI: 10.1080/10236210490504067(Journal) (4754709-N ) DOI: 10.1155/S1023621X04000478(Journal) ========================================================== Created: 2013-11-10 11:32:25.0 ConfID: 4771454 CauseID: 1362563593 OtherID: 110073336, 1362658496 JT: International Journal of Rotating Machinery MD: Kirk, 9 ,2,63,2003,Expert System Source Identification of Excessive Vibration DOI: 10.1080/10236210309496(Journal) (4771454-N ) DOI: 10.1155/S1023621X03000071(Journal) ========================================================== Created: 2013-11-15 19:22:17.0 ConfID: 4779713 CauseID: 1362658496 OtherID: 109931915, 1372271595 JT: International Journal of Rotating Machinery MD: Thakker, 9 ,6,443,2003,Effects of Compressibility on the Performance of a Wave-Energy Conversion Device with an Impulse Turbine Using a Numerical Simulation Technique DOI: 10.1080/10236210390253418(Journal) (4779713-N ) DOI: 10.1155/S1023621X03000435(Journal) ========================================================== Created: 2013-11-10 11:31:44.0 ConfID: 4802531 CauseID: 1362563584 OtherID: 110081825, 1362658496 JT: International Journal of Rotating Machinery MD: Zaretsky, 9 ,5,313,2003,Weibull-Based Design Methodology for Rotating Structures in Aircraft Engines DOI: 10.1080/10236210309502(Journal) (4802531-N ) DOI: 10.1155/S1023621X03000290(Journal) ========================================================== Created: 2013-11-15 19:22:17.0 ConfID: 4802575 CauseID: 1362658496 OtherID: 110081825 JT: International Journal of Rotating Machinery MD: Kato, 9 ,5,345,2003,Large-Eddy Simulation of Unsteady Flow in a Mixed-Flow Pump DOI: 10.1080/10236210309500(Journal) (4802575-N ) DOI: 10.1155/S1023621X03000320(Journal) ========================================================== Created: 2013-11-10 11:32:25.0 ConfID: 4816701 CauseID: 1362563593 OtherID: 110080135, 1362658496 JT: International Journal of Rotating Machinery MD: Furukawa, 9 ,4,285,2003,Pressure Fluctuation in a Vaned Diffuser Downstream from a Centrifugal Pump Impeller DOI: 10.1080/10236210309516(Journal) (4816701-N ) DOI: 10.1155/S1023621X03000265(Journal) ========================================================== Created: 2013-11-15 19:22:17.0 ConfID: 4823441 CauseID: 1362658496 OtherID: 110076146 JT: International Journal of Rotating Machinery MD: Gutzwiller, 9 ,3,197,2003,Vibration and Stability of 3000-hp, Titanium Chemical Process Blower DOI: 10.1080/10236210309522(Journal) (4823441-N ) DOI: 10.1155/S1023621X03000186(Journal) ========================================================== Created: 2013-11-10 11:32:36.0 ConfID: 4823489 CauseID: 1362563596 OtherID: 112522586, 1362658485 JT: International Journal of Rotating Machinery MD: Balbahadur, 10 ,6,469,2004,Part I—Theoretical Model for a Synchronous Thermal Instability Operating in Overhung Rotors DOI: 10.1080/10236210490504021(Journal) (4823489-N ) DOI: 10.1155/S1023621X04000466(Journal) ========================================================== Created: 2013-11-10 11:31:24.0 ConfID: 4836606 CauseID: 1362563578 OtherID: 110051274, 1362658489 JT: International Journal of Rotating Machinery MD: Gowda, 8 ,6,403,2002,High-Pressure Annular Seal Leakage and Rotordynamics with Application to Turbomachinery DOI: 10.1080/10236210214330(Journal) (4836606-N ) DOI: 10.1155/S1023621X02000386(Journal) ========================================================== Created: 2013-11-15 19:22:17.0 ConfID: 4874777 CauseID: 1362658496 OtherID: 109931915 JT: International Journal of Rotating Machinery MD: Chuang, 9 ,6,427,2003,Characteristics of Steady and Transient Superfluid Transport for the Cooling of Superconducting Rotating Machines DOI: 10.1080/10236210390241583(Journal) (4874777-N ) DOI: 10.1155/S1023621X03000411(Journal) ========================================================== Created: 2013-11-10 11:31:24.0 ConfID: 4891940 CauseID: 1362563578 OtherID: 267303640, 1362658489 JT: International Journal of Rotating Machinery MD: CHATELET, 8 ,3,185,2002,A Three Dimensional Modeling of the Dynamic Behavior of Composite Rotors DOI: 10.1080/1023-620291910815(Journal) (4891940-N ) DOI: 10.1155/S1023621X02000179(Journal) ========================================================== Created: 2019-06-11 09:35:53.0 ConfID: 5498547 CauseID: 1447453693 OtherID: 267303640 JT: International Journal of Rotating Machinery MD: AKEL, 8 ,5,337,2002,Toward CFD-Based Correlations for Single-Stage High-Pressure Transonic Turbine Stage DOI: 10.1080/1023-620291910761(Journal) (5498547-N ) DOI: 10.1155/S1023621X02000325(Journal)