Issue 9, 1995

Comparison between direct current and radiofrequency glow discharge mass spectrometry for the analysis of oxide-based samples

Abstract

Glow discharge mass spectrometry (GDMS) using either a direct current (dc) or a radiofrequency (rf) discharge has been evaluated. For conducting samples, comparable results are obtained, as indicated by the uniformity in relative sensitivity factors (RSFs). For the analysis of rare earth oxide materials, the RSFs for dc GDMS are far less affected by changes in discharge pressure and sample to exit-orifice distance than those obtained for rf GDMS. Despite the higher variability of RSFs for rf GDMS, very stable and reproducible plasma conditions are obtained when working at a fixed pressure and distance. The latter is indicated by the internal (within-sample) and external (sample-to-sample) reproducibility of less than 5 and 15%, respectively.

Article information

Article type
Paper

J. Anal. At. Spectrom., 1995,10, 689-695

Comparison between direct current and radiofrequency glow discharge mass spectrometry for the analysis of oxide-based samples

S. de Gendt, R. van Grieken, W. Hang and W. W. Harrison, J. Anal. At. Spectrom., 1995, 10, 689 DOI: 10.1039/JA9951000689

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements