Abstract
Since the advent of 3D printing in the mid-1980s, additive manufacturing has grown steadily and found numerous applications across all types of industries. More recently, the industry has seen a spur of growth as the terms of the original patents expired and new companies entered the market. While there exist several different methods of additive manufacturing, polymer-based material extrusion 3D printing (also known as fused filament fabrication) has become one of the most widely used ones due to its lower cost, ease of use, and versatility. While development has greatly expanded the material availability and improved the quality of prints, material extrusion 3D printers have often faced a challenge in physical scaling. There are inherent design hurdles to the extrusion process when the print starts to grow larger. This paper aims to study the market landscape of extrusion-based 3D printing technology for polymer-based material as well as challenges faced in upscaling this technology for industrial applications. A prototype large-scale material extrusion 3D printer has been designed, constructed, and then tested to gain experimental data on large-scale 3D printing using thermoplastic polymers as a printing material. Results of testing and experimentation verified certain key design elements and how they can improve large-scale 3D printing. Testing also revealed how large diameter nozzles for the hot end introduce challenges not seen in small-scale 3D printers. This paper also seeks to consolidate available information pertaining to large-scale 3D printing into one comprehensive document.
Similar content being viewed by others
References
Wong KV, Hernandez A (2012) A review of additive manufacturing. Int Sch Res Netw Mech Eng 12:208760. https://doi.org/10.5402/2012/208760
McWilliams A (2015) Global markets for 3-D printing. BCC Research, Massachusetts
Global additive manufacturing market, forecast to 2025 Frost Published in 2016 by Sullivan's Global 360° Research Team. Retrieved from http://namic.sg/wp-content/uploads/2018/04/global-additive-manufacturing-market_1.pdf
Haghighi A, Li L (2016) Study of the relationship between dimensional performance and manufacturing cost in fused deposition modeling. Rapid Prototyp J 24(2):395–408
McWilliams A (2016) Advanced materials for 3-D printing: technologies and global markets. BCC Research, Massachusetts
3D printing market, global forecast to 2022, Published in 2016 by MARKETS and MARKETS.
Quinsat Y, Lartigue C, Brown CA, Hattali L (2018) Characterization of surface topography of 3D printed parts by multi-scale analysis. Int J Interact Des Manuf 12(3):1007–1014
Cincinnati Incorporated, CI BAAM, 2018. [Online]. Available: https://www.e-ci.com/baam. Accessed 26 October 2018
Lansard M, The 15 largest 3D printers in 2018, Aniwaa, 13 June 2018. [Online]. Available: https://www.aniwaa.com/largest-3d-printers/#The_15_largest_3D_printers_in_2018. Accessed 9 June 2018
Irwin DJL, Pearce JM, Anzalone G, Oppliger DE (2014) The RepRap 3-D printer revolution in STEM education. In: 121st American Society for Engineering Education Annual Conference & Exposition, Indianapolis
Holshouser C, Newell C, Palas S, Duty C, Kunc V, Lind R, Lloyd P, Rowe J, Dehoff R, Peter W, Blue C (2013) Out of bounds additive manufacturing. Adv Mater Process 171(3):15–17
Minetola P, Galati M (2018) A challenge for enhancing the dimensional accuracy of a low-cost 3D printer by means of self-replicated parts. Addit Manuf 22:256–264
Chen Y, Squires A, Seifabadi R, Xu S, Agarwal HK, Bernardo M, Pinto PA, Choyke P, Wood B, Tse ZTH (2016) Robotic system for MRI-guided focal laser ablation in the prostate. IEEE/ASME Trans Mechatron 22(1):107–114
Sollmann KS, Jouaneh MK, Lavender D (2009) Dynamic modeling of a two-axis, parallel, H-frame-type XY positioning system. IEEE/ASME Trans Mechatron 15(2):280–290
Ajinjeru C, Kishore V, Liu P, Lindahl J, Hassen AA, Kunc V, Post B, Love L, Duty C (2018) Determination of melt processing conditions for high performance amorphous thermoplastics for large format additive manufacturing. Addit Manuf 21:125–132
Aliheidari N, Christ J, Tripuraneni R, Nadimpalli S, Ameli A (2018) Interlayer adhesion and fracture resistance of polymers printed through melt extrusion additive manufacturing process. Mater Des 156:351–361
Batchelder JS, Crump SS (1999) Method for rapid prototyping of solid models. United States Patent 5,866,058, 2
Ontario Ministry of Labour, Heat stress, Ontario Ministry of Labour, June 2014. [Online]. Available: https://www.labour.gov.on.ca/english/hs/pubs/gl_heat.php. Accessed 29 June 2018]
Swanson WJ, Turley PW, Leavitt PJ, Karwoski PJ, LaBossiere JE, Skubic RL (2004) High temperature modeling apparatus. United States Patent 6,722,872, 20
Volpato N, Kretschek D, Foggiatto JA, Cruz C (2015) Experimental analysis of an extrusion system for additive manufacturing based on polymer pellets. Int J Adv Manuf Technol 81(9–12):1519–1531
Jani M, Print detailed objects faster using adaptive layers in Ultimaker Cura, Ultimaker, 22 March 2018. [Online]. Available: https://ultimaker.com/en/blog/52520-print-detailed-objects-faster-using-adaptive-layers-in-ultimaker-cura. Accessed 25 May 2018
Prusa J. Smooth variable layer height and awesome supports in Slic3r Prusa edition, Prusa Research, 2017. [Online]. Available: https://www.prusaprinters.org/smooth-variable-layer-height-awesome-supports-slic3r-prusa-edition/. Accessed 25 May 2018
McMillan M, Marten J, Martin L, Milan B (2015) Programmatic lattice generation for additive manufacture. Procedia Technol 20:178–184
Sedra AS, Smith KC (2015) Microelectronic circuits seventh edition. Oxford University Press, New York
Bergman TL, Lavine AS, Incropera FP, DeWitt DP (2011) Fundamentals of heat and mass transfer seventh edition. Wiley, New Jersey
Hibbeler RC (2014) Mechanics of materials ninth edition. Prentice Hall, New Jersey
Chohan JS, Singh R (2017) Pre and post processing techniques to improve surface characteristics of FDM parts: a state of art review and future applications. Rapid Prototyp J 23(3):495–513
Acknowledgments
The authors acknowledge the technical support received from Automotive Center of Excellence (ACE) at Ontario Tech University.
Funding
The authors received financial support from the Robotics, Automation, and Controls grant from the National Research Council-Industrial Research Assistance Program (NRC-IRAP), the Firefly grant via Ontario Tech University Brilliant Entrepreneurship program, and our private investor, Mr. Yuri Perez.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
This is to declare that this paper is the result of a capstone project funded through Ontario Tech University Brilliant Entrepreneurship and NRC-IRAP. The fund was given to Opifex Inc. as a start-up company established by the following students: Jesika Shah, Tim Clarke, Maciej Lacki, Scott Kozutsky, and Yuri Perez, and the project was supervised by Dr. Ali Hosseini.
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Shah, J., Snider, B., Clarke, T. et al. Large-scale 3D printers for additive manufacturing: design considerations and challenges. Int J Adv Manuf Technol 104, 3679–3693 (2019). https://doi.org/10.1007/s00170-019-04074-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-019-04074-6